Gastroback 40118 User Manual - Page 10

Disassembling your Gastroback Easy Juicer ! WARNING: Always turn the appliance off and pull the plug when the appliance is not in use or when disassembling, moving or cleaning the appliance. Never let water or other liquids run into the motorblock. Never clean the line cord or the motorblock in the dishwasher, poor liquids over the appliance or douse or dip it in water or other liquids. Step 1: Push the 'ON/OFF' button on the Easy Juicer to 'OFF' and then switch 'OFF' at the power outlet and unplug. Important Wait for the filter basket to stop spinning before continuing to step 2 (Picture 1). Step 2: Pull the locking arm back over the grooves on either side of the juicer cover (Picture 2). Move the locking arm down. 1 Step 3: Remove the integrated pulp container (preferably with the juicer cover, stainless steel mesh filter and food pusher in place) by lifting vertically from the motor base. Take it to the sink for easy cleaning (Picture 3). Step 4: Remove the food pusher by lifting it vertically. Step 5: 2 Remove the juicer cover from the integrated pulp container by lifting it vertically. Remove any pulp from the cover by using the flat end of the brush to gently scrape down the sides. 3 10