Gastroback 40118 User Manual - Page 9
Operating your Gastroback Easy Juicer
View all Gastroback 40118 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operating your Gastroback Easy Juicer ! WARNING: Make sure the appliance is completely assembled and that there are nor foreign objects in the feed chute before putting the plug into the power point. Never put fingers, wooden spoons or other foreign substances (such as hair, clothing, brushes, cloth) into the feed chute. Always turn the appliance off and wait for the motor to stop moving before removing the lid of the juicer. Keep the working place clean and dry. Do not let any liquids or water run into the motorblock Do not put any cloth or napkins underneath the appliance to avoid endangering by fire and voltage. In case that water or other liquids ran into the motorblock while operating turn off the appliance immediately, pull the plug and dry the appliance with a clean cloth. Operate according to the instructions ´Trouble shooting guide` Step1: Wash your selection of fruit and vegetables before juicing. feed chute. Using the food pusher, gently guide food down the feed chute. To extract the maximum amount of juice, always push the food pusher down slowly. ! NOTE: In case that the appliance slows down, stumbles or stops all of a sudden turn off the appliance immediately and pull the plug to avoid overheating. Operate according to the instructions ´Trouble shooting guide`. ! WARNING: Never use fingers to push food down the feed chute or to clear the feed chute. Always use the food pusher provided. Step 5: Juice will flow into the juice jug and the separated pulp will accumulate in the integrated pulp container. ! NOTE: When the integrated pulp container is full of pulp, it must be emptied before continuing to juice. (Refer to disassembling instructions). Reassemble machine to continue juicing. ! NOTE: Most fruit and vegetables such as small apples, carrots and cucumber will not need to be cut to size as these will fit into the feed chute whole. When juicing carrots place the tip of the carrot into the feed chute last. Step 2: Ensure the Easy Juicer is correctly assembled. Ensure the stainless steel filter is thoroughly cleaned before each use (refer to ´Care and cleaning`). Ensure you place the juice jug with lid fitted (or glass) under spout before commencing juicing. Step 3: Plug the power cord into a 230/240V power outlet and turn the power 'ON'. Push the 'ON/OFF' button to 'ON'. Step 4: With the motor running, place food into the Slowly push down the food pusher to get the most profitable amount of juice 9