Gastroback 40118 User Manual - Page 7
Assembling your Gastroback Easy Juicer
View all Gastroback 40118 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembling your Gastroback Easy Juicer Before first usage: Rinse all the units of the appliance that come into contact with food with water and clean them with dishwashing detergent. Operate according to the instructions ´Care and cleaning´. ! WARNING: Handle the units with care and do not use any force. Pay attention to the sharp blades on the stainless steel micro mesh filter and the feed chute to avoid injury. Always completely assemble your juicer before you plug the plug into the power point. 1 Step1: Place the motor base on a flat, dry surface such as a bench top. Ensure that the motor base is switched 'OFF' at the power outlet and the power cord is unplugged. Step 2: Place the integrated pulp container on top of the motor base. Locate the integrated pulp container so that the spout fits through the hole on the front of the motor base (Picture 1). Step 3: Align the arrows on the stainless steel filter basket with the arrows on the motor drive coupling and push down until it clicks into place. Ensure the 2 stainless steel filter basket is fitted securely inside the integrated pulp container and onto the motor base (Picture 2). Step 4: Place the juicer cover over the stainless steel filter and integrated pulp container. The humps of the rim of the juicer cover should align with the small plastic wings on the integrated pulp container. Lower into position. The juicing cover can be positioned in either of the plastic wings on the integrated pulp container. (Picture 3). 3 7