Gastroback 40979 User Manual - Page 7

Dissemble the mixing tools, Planetary mixing action

Get Gastroback 40979 PDF manuals and user guides View all Gastroback 40979 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

The splash guard can now be assembled if required. Slide the main ring into position on top of bowl, then assemble the pour spout. NOTE: When ingredients are in the mixing bowl, the scraper beater may make a slight noise as it scrapes the sides and bottom of the bowl. This is normal and should not cause concern. Do not turn the stand mixer on with the scraper beater in place if the mixing bowl is empty. This will cause the scraper beater to make a loud noise as it scrapes the bowl. Dissemble the mixing tools Push the attachment of the processing tool upward until it is released of the indent. Turn the processing tool anticlockwise until the guiding pin of the motor head fits through the cannelure of the mixing tool. You can release the mixing tool now by pulling it downward. Clean the appliance after use in accordance to the instructions in chapter ´Care and Cleaning`. Do not leave any food dry on the surfaces of the appliance. Planetary mixing action By replicating a similar mixing action used by commercial mixers in bakeries and patisseries, The Design Stand Mixer Advanced Pro head rotates around the bowl whilst rotating the beater in the opposite direction. This ensures a superior and thorough mixing result without the need for a rotating bowl. Ensure the control dial is set to the 'Off' position, plug the cord into a 220-240 V power outlet and switch the power 'ON' at the power outlet. The illuminated LED programme indicator band will flash and the count up/down timer will display "0:00." The stand mixer is now ready to be used. NOTE: If the stand mixer has not been used for 3 minutes it will automatically change from ,Stand by mode' to a power saving ,OFF mode' and the illuminated LED will switch off. To exit ,OFF mode' and begin mixing, turn the dial to the selected speed or press one of the count up/down timer buttons. Add ingredients to the mixing bowl as indicated in the recipe. Always begin mixing by selecting a low speed setting on the control dial. This will prevent ingredients splattering. Increase the speed as suited to the mixing task. The speed setting can be adjusted during operation by moving the dial clockwise for the main mixing settings. If necessary, stop the mixer during operation and scrape any food mixture down the sides of the mixing bowl with a spatula. NOTE: Always turn the appliance off if you need to scrape the bowl during use, and then switch back on and continue mixing. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
35
The splash guard can now be assembled if required. Slide the main ring into position on top
of bowl, then assemble the pour spout.
NOTE:
When ingredients are in the mixing bowl, the scraper beater may make a slight
noise as it scrapes the sides and bottom of the bowl. This is normal and should not cause
concern. Do not turn the stand mixer on with the scraper beater in place if the mixing bowl is
empty. This will cause the scraper beater to make a loud noise as it scrapes the bowl.
Dissemble the mixing tools
Push the attachment of the processing tool upward until it is released of the indent. Turn the
processing tool anticlockwise until the guiding pin of the motor head fits through the canne-
lure of the mixing tool. You can release the mixing tool now by pulling it downward. Clean
the appliance after use in accordance to the instructions in chapter ´Care and Cleaning`.
Do not leave any food dry on the surfaces of the appliance.
Planetary mixing action
By replicating a similar mixing action used by commercial mixers
in bakeries and patisseries, The Design Stand Mixer Advanced
Pro head rotates around the bowl whilst rotating the beater in the
opposite direction. This ensures a superior and thorough mixing
result without the need for a rotating bowl.
Ensure the control dial is set to the ‘Off’ position, plug the cord
into a 220-240 V power outlet and switch the power ‘ON’ at the
power outlet. The illuminated LED programme indicator band will
flash and the count up/down timer will display “0:00.” The stand
mixer is now ready to be used.
NOTE:
If the stand mixer has not been used for 3 minutes it will
automatically change from ‚Stand by mode‘ to a power saving
‚OFF mode‘ and the illuminated LED will switch off. To exit ‚OFF
mode‘ and begin mixing, turn the dial to the selected speed or
press one of the count up/down timer buttons.
Add ingredients to the mixing bowl as indicated in the recipe.
Always begin mixing by selecting a low speed setting on the
control dial.
This will prevent ingredients splattering. Increase the speed as
suited to the mixing task. The speed setting can be adjusted during
operation by moving the dial clockwise for the main mixing set-
tings.
If necessary, stop the mixer during operation and scrape any food
mixture down the sides of the mixing bowl with a spatula.
NOTE:
Always turn the appliance off if you need to scrape the
bowl during use, and then switch back on and continue mixing.