Gastroback 42612 User Manual - Page 21

Step 9 - Extraction, Pre-brew Function, Preset Shot Size - One Shot, Preset Shot Size - Double Shot

Get Gastroback 42612 PDF manuals and user guides View all Gastroback 42612 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

STEP 9 - EXTRACTIon • Ensure all the button surrounds on the control panel are illuminated, indicating the machine has reached the correct temperature for brewing, and is ready for use. • Ensure the drip tray and portafilter are in place. • Place one or two pre-warmed cups beneath the portafilter outlet. Note: PRE-BREW FUNCTION: When a preset shot size on the front, right hand side of the machine is selected, the machine will pump water momentarily, followed by a pause then continue to pump the water through to the grounds in the portafilter. The ground coffee is moistened by a small amount of water before full extraction. This expands the grinds, resulting in greater pressure build-up to extract all the oils and full flavor from the ground beans. PRESET SHOT SIZE - ONE SHOT Press the -button once. A preset extraction of approximately 1 oz of espresso will be delivered. A pumping noise will be heard in this operation. The machine will automatically stop once the preset pour has been delivered. Note: The amount of espresso extracted in the cup will vary depending on the coarseness of your grind and grind amount Note: When using a single shot filter, for optimal flavor, you should only extract approximately 1 oz. When using a double shot filter, for optimal flavor, you should only extract approximately 2 oz. PRESET SHOT SIZE - DOUBLE SHOT Press the -button once. A preset extraction of approximately 2oz of espresso will be delivered. A pumping noise will be heard in this operation. The machine will automatically stop once the preset pour has been delivered. Note: Pressing the -button or the pour. -button during an extraction will immediately stop PROGRAMMING SINGLE ESPRESSO Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to pour your preferred shot size. 1. Prepare to make a single shot of espresso by following steps 2 to 6 in ›Dual Wall Filters for Beginners‹. 2. Place your cup underneath the group head. 3. To begin programming, press the PROGRAM-button once. The machine will beep once and the program button will begin to flash. This indicates the machine is in programming mode. 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
59
STEP 9 – EXTRACTION
• Ensure all the button surrounds on the control panel are illuminated, indicating the machi
-
ne has reached the correct temperature for brewing, and is ready for use.
• Ensure the drip tray and
portafilter are in place.
• Place one or two pre-warmed cups beneath the
portafilter outlet.
Note:
PRE-BREW FUNCTION:
When a preset shot size on the front, right hand side of
the machine is selected, the machine will pump water momentarily, followed by a pause then
continue to pump the water through to the grounds in the portafilter. The ground coffee is
moistened by a small amount of water before full extraction. This expands the grinds, resul-
ting in greater pressure build-up to extract all the oils and full flavor from the ground beans.
PRESET SHOT SIZE - ONE SHOT
Press the
-button once. A preset extraction of approximately 1 oz of espresso will be
delivered. A pumping noise will be heard in this operation. The machine will automatically
stop once the preset pour has been delivered.
Note:
The amount of espresso extracted in the cup will vary depending on the coarseness
of your grind and grind amount
Note:
When using a single shot filter, for optimal flavor, you should only extract appro-
ximately 1 oz. When using a double shot filter, for optimal flavor, you should only extract
approximately 2 oz.
PRESET SHOT SIZE - DOUBLE SHOT
Press the
-button once. A preset extraction of approximately 2oz of espresso will be
delivered. A pumping noise will be heard in this operation. The machine will automatically
stop once the preset pour has been delivered.
Note:
Pressing the
-button or
-button during an extraction will immediately stop
the pour.
PROGRAMMING SINGLE ESPRESSO
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to
pour your preferred shot size.
1.
Prepare to make a single shot of espresso by following steps 2 to 6 in ›Dual Wall Filters
for Beginners‹.
2.
Place your cup underneath the group head.
3.
To begin programming, press the PROGRAM-button once. The machine will beep once and
the program button will begin to flash. This indicates the machine is in programming mode.