Gastroback 42612 User Manual - Page 30

Cleaning / Unblocking The Filters, Portafilter And Group Head, Cleaning The Outer Housing / Cup

Get Gastroback 42612 PDF manuals and user guides View all Gastroback 42612 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

• If the steam wand remains blocked, use the pin on the cleaning tool to clear the opening. • If the steam wand continues to be blocked, the tip of the steam wand can be removed by using the fitting in the middle of the cleaning tool. • Unscrew the tip with the cleaning tool. • Soak the tip in hot water before using the pin on the cleaning tool to unblock. Replace the tip back onto the steam wand and secure with the cleaning tool. CLEANING / UNBLOCKING THE FILTERS, PORTAFILTER AND GROUP HEAD Periodically run water through the machine with the portafilter in place, but without any ground espresso in the filter, to rinse out any residual coffee particles. Should the fine holes in the filters become blocked follow the following steps: 1. Place the filter into the portafilter. Run water through the machine with the filter and por- tafilter, without any ground espresso, in place. 2. The fine pin on the cleaning tool can be used to clear any grinds in the filter holes. 3. To clean the single wall filters simply run water through the portafilter using the manual pour function by holding down the one cup button. 4. For a thorough clean of the filters, run a cleaning cycle of the machine with the portafilter and filter in place. Note: Pin on Cleaning Tool is extremely sharp. Use care when using. CLEANING THE OUTER HOUSING / CUP WARMING PLATE The outer housing and cup warming plate can be cleaned with a soft, damp cloth. Then polish with a soft, dry cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface. CLEANING THE DRIP TRAY The drip tray should be removed, emptied and cleaned at regular intervals, particularly when the drip tray full indicator is showing ›Empty Me!‹. Remove grid, compartments and ›Empty Me!‹ indicator from the drip tray. Dispose of the grounds from the dry compartment into the waste bin. Wash the drip tray with warm soapy water, using a non-abrasive washing liquid, rinse and dry thoroughly. The ›Empty Me!‹ indicator can be removed from the drip tray by pulling upwards to release the side latches. The drip tray base and cover are dishwasher safe. 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
68
• If the steam wand remains blocked, use the pin on the cleaning tool to clear the opening.
• If the steam wand continues to be blocked, the tip of the steam wand can be removed by
using the fitting in the middle of the cleaning tool.
• Unscrew the tip with the cleaning tool.
• Soak the tip in hot water before using the pin on the cleaning tool to unblock. Replace the
tip back onto the steam wand and secure with the cleaning tool.
CLEANING / UNBLOCKING THE FILTERS, PORTAFILTER AND GROUP HEAD
Periodically run water through the machine with the portafilter in place, but without any
ground espresso in the filter, to rinse out any residual coffee particles.
Should the fine holes in the filters become blocked follow the following steps:
1.
Place the filter into the portafilter. Run water through the machine with the filter and por-
tafilter, without any ground espresso, in place.
2.
The fine pin on the cleaning tool can be used to clear any grinds in the filter holes.
3.
To clean the single wall filters simply run water through the portafilter using the manual
pour function by holding down the one cup button.
4.
For a thorough clean of the filters, run a cleaning cycle of the machine with the portafilter
and filter in place.
Note:
Pin on Cleaning Tool is extremely sharp. Use care when using.
CLEANING THE OUTER HOUSING / CUP WARMING PLATE
The outer housing and cup warming plate can be cleaned with a soft, damp cloth. Then
polish with a soft, dry cloth. Do not use abrasive cleansers, pads or cloths which can scratch
the surface.
CLEANING THE DRIP TRAY
The drip tray should be removed, emptied and cleaned at regular inter-
vals, particularly when the drip tray full indicator is showing ›Empty Me!‹.
Remove grid, compartments and ›Empty Me!‹ indicator from the drip
tray. Dispose of the grounds from the dry compartment into the waste
bin. Wash the drip tray with warm soapy water, using a non-abrasive washing liquid, rinse
and dry thoroughly. The ›Empty Me!‹ indicator can be removed from the drip tray by pulling
upwards to release the side latches. The drip tray base and cover are dishwasher safe.