Gateway 510 Gateway 510-Series Computer User's Guide - Page 217
tabs on the sides of the memory module should secure the memory module
View all Gateway 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Installing memory 4 If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it. - OR - If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank. 5 Fill the DIMM 0 memory slot first. When adding memory, fill the DIMM 1 memory slot. Align the notches on the new DIMM with the notches on the memory module bank and press the module firmly into the bank. The tabs on the sides of the memory module should secure the memory module automatically. When the module is secure, you hear a click. 6 Replace the side panel by following the instructions in "Replacing the side panel" on page 192. 7 Return your computer to its upright position. 8 Reconnect the cables and the power cord. www.gateway.com 209