Gateway 9210 Gateway 9210 Server User Guide - Page 49
Connect any cables to the PCI expansion card following the instructions in the card's
View all Gateway 9210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 While holding the retention cover open, remove the expansion card. You can slightly seesaw the card end-to-end to loosen the card, but do not bend the card sideways. Caution Do not touch the contacts on the bottom part of the PCI expansion card. Touching the contacts can cause electrostatic damage to the card. 6 While holding the retention cover open, press the new card into the expansion slot. You can slightly seesaw the card end-to-end to help insert the card, but do not bend the card sideways. 7 Connect any cables to the PCI expansion card following the instructions in the card's documentation. 8 Follow the instructions in "Closing the server case" on page 31. 9 See the PCI expansion card's documentation for software installation instructions. 44 www.gateway.com