Gateway 980 Installing Your Gateway 960 or 980 Server into a Rackmount Cabinet - Page 28
Securing the server in the cabinet
![]() |
View all Gateway 980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing Your Gateway Server into a Rackmount Cabinet Securing the server in the cabinet Tools you need to complete this task: Phillips screwdriver Parts you need to complete this task: I 4 screws (provided by the rackmount cabinet manufacturer) To secure the server in the rackmount cabinet: 1 Close the back door of the rackmount cabinet, then lock it if necessary. 2 Push the server back into the cabinet until the rackmount handles press against the cabinet's front vertical mounting rails. 3 Install screws, supplied by the rackmount cabinet manufacturer, into the four mounting holes on the rackmount handles. Screws Screws 4 Close the front cabinet door, then lock it if necessary. 24 www.gateway.com
![](/manual_guide/products/gateway-computers-960-installing-gateway-960-980-server-rackmount-cabinet-b0e9546/28.png)
24
Installing Your Gateway Server into a Rackmount Cabinet
www.gateway.com
Securing the server in the cabinet
Tools you need to complete this task:
Parts you need to complete this task:
■
4 screws (provided by the rackmount cabinet manufacturer)
To secure the server in the rackmount cabinet:
1
Close the back door of the rackmount cabinet, then lock it if necessary.
2
Push the server back into the cabinet until the rackmount handles press
against the cabinet’s front vertical mounting rails.
3
Install screws, supplied by the rackmount cabinet manufacturer, into the
four mounting holes on the rackmount handles.
4
Close the front cabinet door, then lock it if necessary.
Phillips screwdriver
Screws
Screws