Gateway MT6452 8511725 - Gateway Service Guide - Page 71

www.gateway.com Replacing the external video board Tools you need to complete this task: Flat-blade driver - OR - Scribe or non-marring tool Phillips #0 screwdriver Screws removed during this task: 5.0 mm hex nutdriver 1 black (DVD drive) 2 black (hard drive kit) 2 black (keyboard cover) 1-3 black (keyboard) 4 black (LCD panel hinges) 4 black (palm rest - top) 17 black (palm rest - bottom) 2 chrome hexnut (external video board) 2 black (external video board) To replace the external video board: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the DVD drive by following the instructions in "Replacing the DVD drive" on page 11. 3 Remove the cooling assembly by following the instructions in "Replacing the cooling assembly" on page 14. 4 If the notebook has IEEE 802.11 wireless networking built in, unplug the antenna cables from the IEEE 802.11 wireless card by following the instructions in "Replacing the IEEE 802.11 wireless card" on page 22. 5 Remove the hard drive kit by following the instructions in "Replacing the hard drive" on page 26. 6 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 7 Remove the keyboard by following the instructions in "Replacing the keyboard" on page 31. 8 Remove the LCD panel by following the instructions in "Replacing the LCD panel assembly" on page 38. 67