GE 24959 Instruction Manual - Page 11

Setup (cont.) Setting ALL Volume/Mute Controls to Any Mode You can set all modes to "punch-through" to any mode for Volume/Mute control without needing to change to that mode by doing the following. 1. Press and hold SETUP until the indicator remains on, then release SETUP. 2. Press and hold MUTE until the indicator blinks off, then release the button. 3. Press and release SELECT to select the desired mode (TV, DVD, etc.) for Volume/Mute control; the indicator blinks, then stays on. 4. Press and release MUTE; the indicator turns off. Note: The indicator will blink rapidly for 3 seconds if the mode you have selected does not have Volume/Mute control. 5. All other modes will now "punch-through" to your chosen mode for Volume/Mute control. Setting Any Mode to Use its Own Volume/Mute Control You can set any mode to use only its own Volume/ Mute control. Note: If your chosen mode does not have Volume/ Mute functions, then this remote's VOLUME and MUTE will not operate. 1. Press and hold SETUP until the indicator remains on, then release SETUP. 2. Press and hold MUTE until the indicator blinks off, then release the button. 3. Press and release SELECT to select the desired mode (TV, DVD, etc.); the indicator blinks, then stays on. 4. Press and release VOLUME- (down); the indicator blinks, then stays on. 5. Press and release MUTE; the indicator turns off. 6. All modes will now "punch-through" to the respective modes you have chosen for Volume/ Mute control. 11