GE 24959 Instruction Manual - Page 7
Direct Code Entry - code sheet
View all GE 24959 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Direct Code Entry Direct Code Entry NOTE: You can store any kind of code under any mode (except TV). I.E. you can store a VCR code under the CBL button, or a DVD code under the AUX button, etc. However, you can only store TV codes under the TV button. 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired mode button (TV, DVD, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHANNEL UP (or POWER). If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write your codes down here for easy reference later. Type TV AMP DVD SAT DVR VCR CBL AUX Type stored TV Code 7