GE 28011EE1 User Guide - Page 19

Flash/Call Waiting If you subscribe to the combined Call Waiting Caller ID service from your local telephone company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display. • To connect to the waiting call, press the FLASH/DELETE button on the handset, and your original call is put on hold. • To switch between the two calls, press the FLASH/DELETE button. TIP: Don't use the TALK/CALL BACK or SPEAKER button on the handset to activate custom calling service such as call waiting, or you'll hang up the phone. Last Number Redial You may redial a number up to 32 digits long. To quickly redial the last number you dialed: 1. Press the TALK/CALL BACK or SPEAKER button. 2. Press the REDIAL button. -OR- To quickly choose from any of the last three numbers you dialed: 1. Press the REDIAL button first, then use the 6 or 5 button to select the desired redial number. 2. Press the TALK/CALL BACK or SPEAKER button, the number dials automatically. -OR- If you get a busy signal and want to keep dialing the number, press the REDIAL button to quickly redial the number. Exit Press the *EXIT button to exit a menu function and return to the standby screen. Page The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual. Paging from the Base/Group Page Use the base-only to page all registered handsets at the same time. 1. Make sure the phone is OFF (not in talk mode). 2. Press the PAGE button on the base. 19