GE 28165FE1 User Guide - Page 14

Wall Mounting the Base 1. Turn the base over. 2. Slide the pedestal into the slots on the bottom of the base, and then push the pedestal down until it snaps into place. 3. Slip the mounting holes on the pedestal over the wall plate posts and firmly slide the unit into place. (Wall plate not included.) Base Speakerphone Set Up NOTE: Changing menu settings on the base will only change the settings on the base and changing menu settings on the handset will only change settings on the handset. For example, if you change the language on the handset, it will not change the language on the base. Speakerphone Volume Use the VOLUME (5 or 6) buttons to adjust the speaker volume on the base to a comfortable level during a call OR press the LINE 1 or LINE 2 button on the base and then adjust the volume. VOL -1 is the minimum level and VOL-9 is the maximum. Using the Soft Keys On the base, there are two buttons under the display box which represent several Soft Key (programmable) functions. Use these buttons to activate the Soft Key icons that appear in the display. You may program the following items with the Soft Keys: Caller ID, Ringer, Base Name, Date/Time, Set Language, Tone/Pulse, Room Monitor, Local Area Code and Answerer Setup. NOTE: During programming, you may press the END/CANCEL button at any time to exit. Turning the Answerer(s) On or Off NOTE: The Mailbox Answerer(s) must be ON to hear the voice prompts. 1. Make sure your phone is OFF (not in TALK mode). 2. Press the MENU (SKR) to go to the main menu. 3. Use the 5 or 6 buttons to scroll to ANSWERER SETUP. 4. Press the SELECT (SKL) to confirm. 5. Use the 5 or 6 buttons to select MAILBOX 1 or MAILBOX 2 for setting Mailbox 1 or Mailbox 2. 6. Press the SELECT (SKL) to confirm. 7. Use the 5 or 6buttons to scroll to ANSWER ON/OFF. 8. Press the SELECT (SKL) to enter the menu. ANSWER ON/ANSWER OFF shows in display. 14