GE ASH08FK Owners Manual - Page 12
Remove, The Front Grille, If Attached, Cont., The Air Conditioner, The Case, Prepare The Case
UPC - 084691159704
View all GE ASH08FK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Window Installation Instructions [] REMOVE THE FRONT GRILLE (IF ATTACHED) (cont.) [] Pull the bottom grille corners out to release the lower tabs on each side, NOTE: Do not pull the bottom edge toward you more than 3" or you may damage the tabs of the grille. [] Lift the grille up and off the top tabs. [] REMOVE THE AIR CONDITIONER FROM THE CASE [] Remove the 2 screws on each side of the case. Keep these for later use. [] PREPARE THE CASE [] Remove the backing from the top mounting rail seal strip and attach it to the bottom of the top mounting rail. [] Install the top mounting rail with 4 type A or 5 type A screws (as the installation requires) from the outside of the case. Top mounting rail Cz_., / Front of air conditioner [] Slide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case. Bottom mounting rail [] Insert the frames for the accordion panels into the top and bottom mounting rails. Attach the accordion panels to the side of the case using 6 type A screws. Front of air conditioner Remove packing cardboard and tape, if present. 12