GE ASQ10AK User Manual - Page 6

Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions About the controls on the air conditioner-models with control knob(s). Features and appearance may vary. Controls (on models so equipped) ON/OFF Switch Turns air conditioner on and off. NOTE: If the air conditioner is off and is then turned on while set in a Cool mode, it will take approximately 3 minutes for the compressor to start and cooling to begin. Fan Switch (on some models) Use to set the fan speed to LO or HI. Mode/Temp Control Use to set the air conditioner to the Fan Only or a Cool mode. Fan Only Mode Use Fan Only at HI or LO Fan to provide air circulation and filtering without cooling. Cool Mode Use a Cool setting with HI or LO Fan for cooling. Turn the knob clockwise, toward the larger blue area, for the indoor area to become cooler. Turn the knob counterclockwise, toward the smaller blue Controls (on models so equipped) area, for the indoor air to become warmer. The Mode/Temp control is used to maintain the room temperature. When set in a Cool mode, the compressor will cycle on and off to keep the room at the same level of comfort. Cooling Descriptions For Normal Cooling-Select a Cool mode with the Mode/Temp knob set at the midpoint. For Maximum Cooling-Select a Cool mode with the Mode/Temp knob set toward the larger blue area. For Quieter & Nighttime Cooling-Select a Cool mode with the Mode/Temp knob set toward the smaller blue area. NOTE: If you move the Mode/Temp control knob from a Cool setting to the Fan On setting, wait at least 3 minutes before switching back to a Cool setting. Mode Control Hi Cool, Med Cool and Low Cool provide cooling with different fan speeds. Low Fan or Hi Fan provides air circulation and filtering without cooling. Thermostat Control NOTE: If you move the switch from a cool setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a cool setting. Cooling Descriptions For Normal Cooling-Select Hi Cool or Med Cool with the thermostat control at midpoint. The thermostat control is used to maintain the For Maximum Cooling-Select Hi Cool with the thermostat room temperature. The compressor will cycle on control at the highest number available on your knob. and off to keep the room at the same level of comfort. When you turn the knob to a higher number, the indoor air will become cooler. Turn For Quieter & Nighttime Cooling-Select Low Cool with the thermostat control at midpoint. 6 the knob to a lower number and the indoor air will become warmer. Consumer Support