GE CWB7030SLSS Installation Instructions - Page 8
Installation beside another GE, Appliances/Monogram Built-in, Speedcook Oven, Installation under
View all GE CWB7030SLSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Standard Installation Preparation IMPORTANT: Always maintain 36-3/4" minimum height from the floor to the cutout in any single or combined installation unless plastic trim is installed. PREPARE THE OPENING (cont.) Installation beside another GE Appliances/Monogram Built-in Speedcook Oven: • If you are mounting a GE Appliances/ Monogram Built-In SpeedCook Oven beside another, use the dimensions shown. The middle rail separating the two openings may need to be larger than the 4-1/2Ǝ minimum shown. 23-1/2Ǝ 25-1/4Ǝ 17-1/2Ǝ 25-1/4Ǝ 17-1/2Ǝ 4-1/2Ǝ Min. (5-1/2Ǝ Recommended) PREPARE THE OPENING (cont.) Installation under a GE Appliances/Monogram 30Ǝ or 36Ǝ Cooktop or Countertop: Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for the cutout size. See the label on top of the oven for approved cooktop models. This oven requires a separate, properly grounded 15-Amp, 120-Volt, 60Hz power supply. The cooktop requires a separate power supply. Use a 36Ǝ or wider base cabinet. 1-1/2Ǝ Min. 25Ǝ Cooktop Cooktop 36Ǝ Countertop Height 23-1/2Ǝ 25-1/4Ǝ 17-1/2Ǝ Cooktop height including depth of electrical box on some models. Refer to cooktop installation instructions. No minimum clearance required between cooktop and oven. 4Ǝ High Toekick NOTE: The oven is only approved to be installed under the specific models as labeled on the unit. 8