GE DPVH890EJWW Owners Manual - Page 36
REVERSE DOOR HANDLE, AND CAPS, AND CAPS CONT., reassemble on the opposite side of the chrome
View all GE DPVH890EJWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installation Instructions REVERSING THE DOOR SWING (if desired) 3 REVERSE DOOR HANDLE AND CAPS A Lay the chrome cover down on a soft, protected, flat surface so that the inner part faces upward (resting on the handle side). Disassemble the door cap from the chrome cover on the handle side by removing 2 screws (#8 x 0.625″ tapping screws). 3 REVERSE DOOR HANDLE AND CAPS (CONT.) C Pop the 2 handle caps out toward you and reassemble on the opposite side of the chrome cover, where you removed the outer handle. 2 x D Screws Handle caps Door cap B Disassemble the inner handle from the outer handle by removing 3 screws (#8 x 0.625″ tapping screws). Disassemble the outer handle from the chrome cover by removing 4 screws (#8 x 0.625″ tapping screws). 3 x D Screws (inner handle) Remove 4 x D screws (outer handle) Outer handle D Assemble the outer handle onto the opposite side of the chrome cover, using 4 screws (#8 x 0.625″ tapping screws). Outer handle Replace 4 x D screws (outer handle) 36