GE DPVH890EJWW Owners Manual - Page 40
Stacking The Washer And, Dryer If Desired Cont., Installing The Stack, Bracket Kit - stacking kit
View all GE DPVH890EJWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installation Instructions STACKING THE WASHER AND DRYER (if desired) (cont.) KIT CONTENTS ❒ Right hand bracket ❒ Left hand bracket ❒ 4 #12 x 1″ screws ❒ 4 #8 x 1/2″ screws INSTALLING THE STACK BRACKET KIT 1 REMOVE THE DRYER LEVELING LEGS A. Carefully lay the dryer on its side. Use the packing material so you don't scratch the finish on the dryer. ❒ 4 rubber pads TOOLS YOU WILL NEED ❒ Phillips screwdriver ❒ Open-ended wrench ❒ Gloves ❒ Level ❒ Pliers INSTALLATION PREPARATION Remove the packaging. Flatten the product carton to use as a pad to lay the dryer down on its side. Continue using the carton to protect the finished floor in front of the installation location. B. Use an open-end wrench or pliers to remove the dryer leveling legs. Back out and remove all 4 leveling legs 2 INSTALL RUBBER PADS TO DRYER BASE Locate the 4 rubber pads in the parts package. Remove the adhesive backing and firmly place over on the bracket where you removed the leveling legs. 40