GE GFW490RPKRR Installation Instructions - Page 10

Control settings. 9 10 11 12 Time Saver 13 My Cycle Hold 3 Secs to Store Cycle (Depending on model) PreSoak (on some models) For soaking your garments prior to the PreWash (if selected) and/or wash cycle. This option begins with a brief tumble and then proceeds to soak the clothes for a specified period of time. Once complete, the cycle will begin automatically. PreSoak must be selected prior to pressing Start. The PreSoak time is set in ½ hour increments, with the maximum presoak set option of 8 hours. If desired, add high-efficiency detergent or the proper wash additive to the prewash dispenser. eWash (Energy Savings Wash) (on some models) Use eWash to save energy on specified eWash cannot be used with Allergen, wash cycles. Sanitize, Power Clean and Tub Clean. Overnight Dry™ (on some models) Overnight Dry is available on the following cycles: Active Wear, Whites, Normal and Single Item. Overnight Dry is intended for smaller loads only. This feature is intended for use when clothes need to be washed, dried and ready to wear or finished the next morning. This feature will tumble clothes and introduce a constant stream of air into the machine compartment upon completion of select wash cycles. Clothes can be removed at any time by pressing Pause. To use the feature, press the Overnight Dry button any time before the end of the wash cycle. The display will change to add the default 8 hours max dry time. High wear or delicate articles are not recommended for this cycle. The table below describes example loads that can be used with this feature: 2-3 athletic uniforms 2 sets of scrubs 2 sets of baby's crib sheets 1 dress shirt, 1 pair of dress pants 3 dress shirts Time Saver (on some models) This option reduces the overall washer cycle time by optimizing the wash, rinse and spin actions and/or gently raising the wash temperature to get clothes cleaned faster. Option is available on Normal, Whites, Towels/ Sheets, Delicates, Bulky Items and Active Wear cycles. Total wash time will vary based on cycle chosen and options selected. To use: 1. Turn power on and select a wash cycle which has Time Saver as an option. 2. Make any adjustments to Soil, Temp and Spin as desired. 3. Press the Time Saver button to reduce the overall wash time. 4. Press the Start/Pause button. My Cycle To save a favorite cycle, set the desired settings for wash cycle, soil level, spin speed and wash temp settings and hold down the My Cycle button for 3 seconds. A beep will sound to indicate the cycle has been saved. To use your custom cycle, press the My Cycle button before washing a load. To change the saved cycle, set the desired settings and hold down the My Cycle button for 3 seconds. NOTE: When using My Cycle, wash options cannot be modified after the cycle has been started. NOTE: If you change wash options with My Cycle before starting the cycle, the My Cycle light will turn off and you will be returned to the base cycle. 10