GE GTE21GSHSS Use and Care Manual - Page 18
Remove Refrigerator Door, Transfer Bottom Hinge To The, Transfer Door Stop To The Left, Cont.
View all GE GTE21GSHSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation Instructions REVERSING THE DOOR SWING (CONT.) 2 REMOVE REFRIGERATOR DOOR 1. Remove all food from the inner door liner. 2. Tape the door shut with masking tape. 3. Remove the center hinge pin with a Phillips screwdriver. 4. Remove the center hinge by removing two hinge screws with a 5/16s socket and ratchet. Save the center hinge, hinge pin, screws and center hinge gasket. Center Hinge Pin Center Hinge Gasket 3 TRANSFER BOTTOM HINGE TO THE LEFT 1. Using a 5/16 Socket and ratchet, remove the 2 screws from the bottom hinge. 2. Move the bottom hinge pin from the right to the left side with a thin-blade screwdriver until the shoulder of the hinge pin is touching the hinge. 3. Move the bottom hinge from the right to the left side and tighten the 2 screws. 4. Install the 2 hole plugs from the opposite side of the cabinet to the screw holes vacated by the bottom hinge removal. 5. Remove the tape and tilt the door away from the cabinet. Lift the door straight up to free its bottom socket from the pin in the bottom hinge bracket. 6. Set the door on a non-scratching surface with the inside up. 7. Install the 2 hole plugs from the opposite side of the cabinet to the screw holes vacated by the center hinge removal. 4 TRANSFER DOOR STOP TO THE LEFT 1. On both the refrigerator and freezer doors, remove the screws from the door stop on the right with a Phillips screwdriver. 2. Install the door stop on the left of each door. 18