GE GTE21GSHSS Use and Care Manual - Page 21
Rehang The Refrigerator Door, Rehang The Freezer Door
View all GE GTE21GSHSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation Instructions 7 REHANG THE REFRIGERATOR DOOR 1. Lower the refrigerator door onto the bottom hinge pin. 8 REHANG THE FREEZER DOOR 1. Lower the freezer door onto the center hinge pin. 2. While holding the door securely, align the socket in the door with the hole in the center hinge. Attach the center hinge and gasket with two screws with a 5/16s socket and ratchet. 3. Check to ensure the alignment between the socket in the door and the hole in the center hinge. Insert the hinge pin into the center hinge and tighten with a Phillips screwdriver until the shoulder of the hinge pin is touching the center hinge. 2. Place the left top hinge so the pin fits into the door socket. (Left top hinge and cover can be found inside of the product. Call GE Service at 800.GE.CARES (800.432.2737 or in Canada call 800.561.3344 if parts are missing.) Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge screws. Do not overtighten these screws. Tighten them until they are just snug, and then turn them another one-half turn. 3. Snap the left top hinge cover over the hinge. 21