GE JB968 Owners Manual - Page 8

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Using the surface units-Touch pad-controlled models. Surface Unit Cook Settings The controls for the radiant surface units allow for 10 different heat settings: LO, 2-9 and HI. The heating element may not visibly glow at low heat settings. NOTE: When changing from a high heat setting to a lower heat setting, the surface unit may stop glowing. This is normal. The unit is still on and hot. NOTE: This cooktop has a rapid heat-up feature. If the cooktop is cool when turned on, it will glow red for a short period of time until the desired power setting is reached. Single Surface Unit-Cook Settings To turn on a single surface unit: Touch the ON/OFF pad, then touch the (+)/(-) pad. To turn off a single surface unit, touch the ON/OFF pad again. Use the (+)/(-) pad to choose the desired power setting. Tri-Ring Burner To use the multi-size burner: Touch the ON/OFF pad for the front right surface unit. Use the (+)/(-) pad to set the desired power setting. Touch the BURNER SIZE pad as needed to select the desired burner size. When first selected, the 12″ size is on. Touch again for the 9″ and again for the 6″. The light next to the BURNER SIZE pad indicates which size surface unit is on. To turn the surface unit off, touch the ON/OFF pad. Using Heat Settings s At high or medium-high settings, never leave food unattended. Boilovers cause smoking; greasy spillovers may catch on fire. s It is safe to place hot cookware from the oven or surface units on the glass-ceramic surface when it is cool. NOTE: Cooktop temperatures increase with the number of surface units that are on. With 3 or more units turned on, surface temperatures are high, so be careful when touching the cooktop. The hot surface indicator light(s) will remain lit after the surface unit is off until the surface has cooled below 150°F. 8