GE JGP637BEJBB Owners Manual - Page 13

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support ge.com Metal Marks and Scratches Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface. These marks are removable using the CERAMA BRYTE® Ceramic Cooktop Cleaner with the CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops. If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent. WARNING: Carefully check the bottom of pans for roughness that would scratch the cooktop. Glass surface-potential for permanent damage. Our testing shows that if you are cooking high sugar mixtures such as jelly or fudge and have a spillover, it can cause permanent damage to the glass surface unless the spillover is immediately removed. Damage from Sugary Spills and Melted Plastic Turn off all surface burners and, with an oven mitt, remove hot pans and grates. Any remaining spillover should be left until the surface of the cooktop has cooled. Wearing an oven mitt: a. Use the CERAMA BRYTE® Ceramic Cooktop Scraper to move the spill to a cool area on the cooktop. b. Remove the spill with paper towels. Don't use the surface units again until all of the residue has been completely removed. NOTE: If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary. To Order Parts To order CERAMA BRYTE® Ceramic Cooktop Cleaner and the CERAMA BRYTE® Ceramic Cooktop Scraper, please call our toll-free number: National Parts Center 800.626.2002 CERAMA BRYTE® Ceramic Cooktop Cleaner WX10X300 CERAMA BRYTE® Ceramic Cooktop Scraper WX10X0302 Kit WB50T10054 (Kit includes cream, cleaning pad and cooktop scraper) CERAMA BRYTE® Cleaning Pads for Ceramic Cooktops WX10X350 13