GE JGP637BEJBB Owners Manual - Page 15

Installation Instructions IMPORTANT SAFETY INSTRUCTIONS FOR YOUR SAFETY WARNING!! If the information in this manual is not followed exactly, a fire, explosion or gas leak may result, causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance! WHAT TO DO IF YOU SMELL GAS: STOP! • Open windows. • Extinguish any open flame. • Do not try to light any appliance. Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions. • If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, service agency or the gas supplier. BEFORE YOU BEGIN Installation of this cooktop must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with the current Natural Gas Installation Code, CAN/CGAB149.1 or the current Propane Installation Code, CAN/CGA-B149.2, and with local codes where applicable. This cooktop has been design-certified by CSA International according to ANSI Z21.1, latest edition and Canadian Gas Association according to CAN/CGA-1.1 latest edition. As with any appliance using gas and generating heat, there are certain safety precautions you should follow. You will find these precautions in the Important Safety Information section in the front of this manual. Read them carefully. • Be sure your cooktop is installed properly by a qualified installer or service technician. • To eliminate reaching over surface burners, cabinet storage above burner should be avoided. • Do not install the unit near an outside door or where a draft may affect its use. 15