GE NX-108E User Manual - Page 16
Setting the system date, KEYPAD CONTROL TONES (BEEPS
UPC - 782136402414
View all GE NX-108E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting the system date Step 1 Enter [r] [9][6]. Step 2 Step 3 Step 4 Step 5 Step 6 Enter [master code]. Enter the "Day of Week " 1 = Sunday 3 = Tuesday 2 = Monday 4 = Wednesday 5 = Thursday 7 = Saturday 6 = Friday Enter the "Month Code". Must always be two (2) digits. 01 = January 05 = May 09 = September 02 = February 06 = June 10 = October 03 = March 07 = July 11 = November 04 = April 08 = August 12 = December Enter the "Day Code". Must always be two (2) digits. Example: The 5th would be entered as [0] - [5]. Enter the last two digits of the "Year Code". Example: For 2003 enter [0] - [3]. KEYPAD CONTROL TONES (BEEPS) A sounder is built into the keypad. If programmed, your system keypad may sound for any of the following reasons: • Beeps for all keypresses. • Sounds a continuous tone during the Entry delay time. • Pulses when a day zone is violated while the system is disarmed. • Pulses when a FIRE zone has a trouble condition. • Beeps 3 times for trying to arm with the "Ready" light off, if "Force Arming" has not been selected. • Beeps for 1 second or emits a "ding-dong" sound for the "Chime" feature. • Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit delay; and beeps 1 second at the end of the exit delay. • Pulses when the armed status changes and the AC power is off. • Pulses when the armed status changes and any zone(s) are bypassed. • Pulses when the armed status changes and a low battery is detected. • Pulses when the armed status changes and a Tamper condition is detected. • Beeps to indicate Telephone Line Cut, if selected. • Pulses when one or more of the following conditions are detected: Zone or Box Tamper, Low Battery, AC Power Fail, or Expander trouble. • Beeps 3 times every minute indicating a low battery or missing transmitter is detected (if wireless device is in system). Entering code will suppress the sounder for 12 hours. Entering a valid code will silence the keypad sounder when it is pulsing. The arm/disarm state of your system will not change when entering a code to silence a pulsing keypad sounder. Please contact your installer if a trouble condition exists. NX-108/116/124E User manual Page 16 10/11/05