GE PHP900DMBB Installation Instructions - Page 5

Installation Instructions INSTALLING OPTION-FOR GE MONOGRAM MONOGRAM INDUCTION COOKTOP AND MONOGRAM DOWNDRAFT VENT COMBINATION INSTALLATION ONLY. The installation of the downdraft vent with this cooktop requires careful consideration. Both the cooktop and the vent must be installed according to each specific installation instruction. COOKTOP REQUIREMENTS The countertop must have a deep flat surface to accommodate the cooktop and vent. Countertops with a rolled front edge and backsplash will not provide the flat surface area required. • Review the illustration to determine the countertop surface requirements. - All cutout clearances for this installation must be observed. 2-3/4″ 22-3/8″ cutout depth 19-5/8″ cooktop cutout depth 29-7/8″ SS 29-3/4″ Black 28-1/2″ cooktop and vent area cutout 1-1/32″ cooktop overlap at center 1-3/4″ min. cooktop cutout to rear vertical 1/8″ combustible surface gap 23-1/2″ SS 23-3/8″ Black total flat surface required at center Front edge of countertop BASE CABINET REQUIREMENTS The combined installation will fit in a standard 24″ deep base cabinet. Use a 30″ or wider base cabinet . - The vent housing, blower and ductwork will occupy the base cabinet. 2-1/2″ min. clearance to cutout 2-1/2"″ to Cutout 1-3/4″ min. cutout to wall, both sides 1-7/8"″ 2200--13//186″" 3/4″" 3/4"″ Thick Support Rail Vent 22-3/4″" Inside 22"″ to Support Rail 5