GE PHP900DMBB Installation Instructions - Page 8
Installing The Cooktop, Protect Surface Of Cooktop, Attach Foam Tape, Install Hold-down Brackets - model #
UPC - 084691163671
View all GE PHP900DMBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation Instructions INSTALLING THE COOKTOP 1 PROTECT SURFACE OF COOKTOP Place a towel or tablecloth onto the countertop. Lay the cooktop upside down onto the protected surface. Bottom of Cooktop 3 ATTACH FOAM TAPE Apply the foam tape around the outer edge of the glass. Do not overlap the foam tape. Bottom of Cooktop Foam Tape Cloth under Cooktop Cooktop Glass NOTE: On stainless steel models, apply foam tape on the sides and rear. 2 INSTALL BAFFLE Secure the baffle to the cooktop with screws. NOTE: Do not install the baffle when the cooktop is installed over a single oven. 4 INSTALL HOLD-DOWN BRACKETS Start one screw through the bracket and into the cooktop. (Both sides.) Do not tighten. Turn the bracket inwards to avoid interference when dropping the cooktop into the countertop. 8