GE PWB7030ELES Installation Instructions - Page 13
Slide The Oven Into The, Cutout, Door Trim Removal For, Above 36, Installation
View all GE PWB7030ELES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Instructions 2 DOOR TRIM REMOVAL FOR ABOVE 36ƎINSTALLATION ONLY If installing the Advantium/Convection 120V Oven above 36Ǝ from the floor, you may remove the plastic trim from the bottom of the door for esthetic purposes if desired. CAUTION If installing the Advantium/ Convection 120V Oven below 36Ǝ, do not remove the plastic door trim due to burn risk to children. The plastic trim acts as insulation and will help prevent burns to children from hot surfaces. • If installing above 36Ǝ, remove the 3 screws that secure the plastic trim to the bottom of the door. • Discard plastic trim. Replace screws. 3 SLIDE THE OVEN INTO THE CUTOUT CAUTION Two people are required to lift the oven into the opening. Grasp the bottom at front and rear. DO NOT USE THE HANDLE TO LIFT THE OVEN. DAMAGE WILL OCCUR. • Lift and hold the oven at the front of the opening. Hold the oven at an angle and plug in the power cord. • Carefully, slide the oven into the cabinet part way. Leave the oven a few inches forward of the cabinet frame. • Check to be sure the power cord is not trapped under the oven or along the sides of the oven. 13