GE PWB7030ELES Installation Instructions - Page 9

Flush Mount Installation Preparation Monogram Only

Get GE PWB7030ELES PDF manuals and user guides View all GE PWB7030ELES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Flush Mount Installation Preparation (Monogram Only) IMPORTANT: Always maintain 36-3/4" minimum height from the floor to the cutout in any single or combined installation unless plastic trim is installed. PREPARE THE INTERIOR Cut and install side cleats: • Cut side wood cleats to height of cabinet opening and approx. 2-1/2" in depth. Install, on each side, 1-3/8" from the front face of the cabinet. Cut and install bottom cleat: • Cut bottom wood cleat to a height of 1-1/8", a depth of the cabinet minus 1-3/8" and a width of 25-1/4" to fit between side cleats. Install onto the cabinet floor between the side cleats, push it all the way back against cabinet wall and make sure its front face aligns with the front faces of the side cleats (1-3/8" gap from the front cabinet face). PREPARE THE OPENING The Advantium 120 can be installed in combination with other GE Appliances/ Monogram appliances. Always follow each product's Installation Instructions to complete the installation. Single Advantium 120 Installation: Cut the opening in a cabinet to the dimensions shown. *See table below for desired reveals on sides. 23-1/2" min. F * Construct solid bottom - Min. 3/8" plywood supported on all four sides. Must be able to support weight of oven and contents. A A B A Side cleats depth B Bottom cleat height C Bottom cleat depth D Bottom cleat width E All three cleats C D E 2-1/2" min. 1-1/8" Cabinet depth minus 1-3/8" 25-1/4" Recess and install 1-3/8" IURPGHVLUHGÀXVKVXUIDFH D C TOP VIEW A A Front Face of Cabinet E E **19-1/4" 36-3/4" Min. Oven or warming drawer 2" Min. Per appliance specs. • The support must be level and rigidly mounted, flush with the bottom edge of the cutout. Approved Flush Installation Single Advantium Over Warming Drawer Over Oven Over Oven and Warming Drawer Over Built-in Speedcook Oven Double Advantium (side by side) Under Cooktop or Countertop Dimension F 1/8" Reveal 1/4" Reveal 30" 30-1/4" 30" 30-1/4" 30" 30-1/4" 30" 30-1/4" 30" 30-1/4" See page 10 See page 10 ** Top and bottom reveals are set to 1/8". 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
9
PREPARE THE INTERIOR
Cut and install side cleats:
•
Cut side wood cleats to height of cabinet
opening and approx. 2-1/2” in depth. Install,
on each side, 1-3/8” from the front face of the
cabinet.
Cut and install bottom cleat:
•
Cut bottom wood cleat to a height of 1-1/8”, a
depth of the cabinet
minus
1-3/8” and a width
of 25-1/4” to fit between side cleats. Install
onto the cabinet floor between the side cleats,
push it all the way back against cabinet wall
and make sure its front face aligns with the front
faces of the side cleats (1-3/8” gap from the
front cabinet face).
Flush Mount Installation Preparation (Monogram Only)
A
Side cleats depth
2-1/2” min.
B
Bottom cleat height
1-1/8”
C
Bottom cleat depth
Cabinet depth
minus
1-3/8”
D
Bottom cleat width
25-1/4”
E
All three cleats
Recess and install 1-3/8”
TOP
VIEW
Front Face of Cabinet
E
E
A
A
C
D
E
C
B
D
A
A
IMPORTANT:
Always maintain 36-3/4” minimum height from the floor to the cutout in any single or
combined installation unless plastic trim is installed.
PREPARE THE OPENING
The Advantium 120 can be installed in
combination with other GE Appliances/
Monogram appliances. Always follow each
product’s Installation Instructions to complete the
installation.
Single Advantium 120 Installation:
Cut the opening in a cabinet to the dimensions
shown.
• The support must be level and rigidly mounted,
flush with the bottom edge of the cutout.
**19-1/4”
Construct
solid bottom
- Min. 3/8”
plywood
supported on
all four sides.
Must be able to
support weight
of oven and
contents.
36-3/4”
Min.
F
*
23-1/2” min
.
2” Min.
*See table
below for
desired reveals
on sides.
Per
appliance
specs.
Oven or
warming
drawer
Approved Flush Installation
Dimension F
1/8” Reveal
1/4” Reveal
Single Advantium
30”
30-
1
/
4
”
Over Warming Drawer
30”
30-
1
/
4
”
Over Oven
30”
30-
1
/
4
”
Over Oven and Warming Drawer
30”
30-
1
/
4
”
Over Built-in Speedcook Oven
30”
30-
1
/
4
”
Double Advantium (side by side)
See page 10
Under Cooktop or Countertop
See page 10
** Top and bottom reveals are set to
1
/
8
”.