Gigabyte G1.Sniper M5 User Manual - Page 43
CPU/OPT Fan Speed Control CPU_FAN and CPU_OPT Connectors
View all Gigabyte G1.Sniper M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
&& Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. && Case Open Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. && CPU Vcore/CPU VRIN/DRAM Voltage/+3.3V/+5V/+12V/CPU VAXG Displays the current system voltages. && CPU/System/PCH Temperature Displays current CPU/System/Chipset temperature. && CPU/CPU OPT/System Fan Speed Displays current CPU/CPU_OPT/system fan speeds. && CPU/System Warning Temperature Sets the warning threshold for CPU/system temperature. When CPU/system temperature exceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF. && CPU/CPU OPT/System Fan Fail Warning Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled) && CPU/OPT Fan Speed Control (CPU_FAN and CPU_OPT Connectors) Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal Allows the fan to run at different speeds according to the CPU temperature. You can adjust the fan speed with EasyTune based on your system requirements. (Default) Silent Allows the fan to run at slow speeds. - 43 - BIOS Setup