Gigabyte G1.Sniper M5 User Manual - Page 66
Recovery Volume Options, Create RAID Volume, MAIN MENU, Recovery, RAID Level
View all Gigabyte G1.Sniper M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Recovery Volume Options Intel® Rapid Recover Technology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive. With the Rapid Recovery Technology, which employs RAID 1 functionality, users can copy the data from the master drive to the recovery drive; if needed, the data on the recovery drive can be restored back to the master drive. Before you begin: •• The recovery drive must have equal or greater capacity than the master drive. •• A recovery volume can be created with two hard drives only. A recovery volume and a RAID array cannot co-exist in the system at the same time, that is, if you have already created a recovery volume, you are unable to create a RAID array. •• By default, only the master drive can be viewed in the operating system; the recovery drive is hidden. Step 1: Select Create RAID Volume in MAIN MENU and press (Figure 15). Intel(R) Rapid Storage Technology - Option ROM - 12.0.0.1783 Copyright(C) 2003-13 Intel Corporation. All Rights Reserved. 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID [ MAIN MENU ] 4. Recovery Volume Options 5. Acceleration Options 6. Exit RAID Volumes : None defined. [ DISK/VOLUME INFORMATION ] Physical Disks : IE Drive Model Serial # Size 0 S T3120026AS 3JT354CP 111.7GB 1 S T3120026AS 3JT329JX 111.7GB Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk [hi]-Select [ESC]-Exit [ENTER]-Select Menu Step 2: Figure 15 After entering the volume name, select Recovery under the RAID Level item and press (Figure 16). Intel(R) Rapid Storage Technology - Option ROM - 12.0.0.1783 Copyright(C) 2003-13 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name : Volume0 RAID Level : Recovery Disks : Select Disks Strip Size : N/A Capacity : 111.7 GB Sync : Continuous Create Volume [ HELP ] Recovery: Copies data between a master and a recovery disk. [hi]-Change [TAB]-Next Configuring SATA Hard Drive(s) [ESC]-Previous Menu Figure 16 - 66 - [ENTER]-Select