Gigabyte GA-7TCSV4 Manual - Page 47

Power Menu

Get Gigabyte GA-7TCSV4 PDF manuals and user guides View all Gigabyte GA-7TCSV4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

2-3 Power Menu Power On by RTC Alarm Select whether to wake up the system when an RTC alarm is detected. Options available: On/Off. Default setting is Off. Power On by PCI & PCIE Devices Select whether to wake up the system when PCI or PCI Express devices are detected. Options available: Enabled/Disabled. Default setting is Disabled. Support WOL from AC lost Determines whether to enable WOL function when the system shutdown occurs. Options available: Enabled/Disabled. Default setting is Disabled. After Power Failure Defines the power state to resume to after a sys- tem shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. When set to Stay Off, the system remains off after power shutdown. Options available: Last State/Stay Off/Power On. Default setting is Last State. - 47 - BIOS Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
- 47 -
BIOS Setup
2-3
Power Menu
Power On by RTC Alarm
Select whether to wake up the system when an RTC alarm is detected.
Options available: On/Off. Default setting is
Off
.
Power On by PCI & PCIE Devices
Select whether to wake up the system when PCI or PCI Express devices are detected.
Options available: Enabled/Disabled. Default setting is
Disabled
.
Support WOL from AC lost
Determines whether to enable WOL function when the system shutdown occurs.
Options available: Enabled/Disabled. Default setting is
Disabled
.
After Power Failure
Deļ¬nes the power state to resume to after a sys- tem shutdown that is due to an interruption in AC
power. When set to Last State, the system will return to the active power state prior to shutdown. When
set to Stay Off, the system remains off after power shutdown.
Options available: Last State/Stay Off/Power On. Default setting is
Last State
.