Gigabyte GA-K8U User Manual - Page 36

English 2-4 Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Power Management Setup ACPI Suspend Type AC BACK Function Soft-Off by PWRBTN PME Event Wake Up Modem Ring Resume USB Dev WakeUp From S3 Resume by Alarm x Date (of Month) Alarm x Time (hh:mm:ss) Alarm POWER ON Function [S1(POS)] [Soft-Off] [Instant-off] [Enabled] [Enabled] [Disabled] [Disabled] Everyday 0 : 0 : 0 [Disabled] Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults ACPI Suspend Type S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value) S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM). AC BACK Function Soft-Off When AC-power back to the system, the system will be in "Off" state. (Default value) Full-On Memory When AC-power back to the system, the system always in "On" state. When AC-power back to the system, the system will return to the Last state before AC-power off. Soft-Off by PWRBTN Instant-off Press power button then Power off instantly. (Default value) Delay 4 Sec. Press power button 4 seconds to Power off. Enter suspend if button is pressed less than 4 seconds. PME Event Wake Up This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. Disabled Enabled Disable this function. Enable PME as wake up event. (Default value) Modem Ring Resume An incoming call via modem can awake the system from any suspend state. Disabled Enabled Disable Modem Ring Resume function. Enable Modem Ring Resume function. (Default value) USB Dev WakeUp From S3 You can enable this function when ACPI Suspend Type set to S3(STR). Disabled Disable this function. (Default value) Enabled Enable USB device can wakeup system from S3. GA-K8U Motherboard - 36 -