Gigabyte GA-K8U User Manual - Page 65

English Next, the Array Name input line appears for the user to key in a name for the newly created array. The effective characters for an array name is 0-9, A-Z, a-z, space and underscore. RAID BIOS Setup Utility (c) 2004 ULi Corporation www.uli.com.tw Create RAID 0 Striping for Performance Create RAID 1 Mirroring for Reliability Create JBOD for integrated Capacity Stripe Size 64K SPACE : Select Delete RAID Settings & Partition Delete All RAID Settings & Partition , : Moving Cursor Enter : Select & Finish Rebuild RAID Array ESC : Exit Input RAID Name (8 characters) : ALi_RAID Drive Model Mode S Channel 1 Master : ST3120026AS SATA 1 s Channel 2 Master : ST3120026AS SATA 1 Capacity 120034 MB 120034 MB RAID Array/Type RAID Array A : RAID Array B : RAID Array C : Capacity RAID Type Stripe Size RAID Name After the RAID array has been created successfully, its information shows up at RAID Array List. RAID BIOS Setup Utility (c) 2004 ULi Corporation www.uli.com.tw Create RAID 0 Striping for Performance Create RAID 1 Mirroring for Reliability Create JBOD for integrated Capacity Stripe Size 64K SPACE : Select Delete RAID Settings & Partition , : Moving Cursor Delete All RAID Settings & Partition Rebuild RAID Array Enter : Select & Finish ESC : Exit Drive Model Channel 1 Master : ST3120026AS Channel 2 Master : ST3120026AS RAID Array A : RAID Array B : RAID Array C : Capacity 240 GB Mode SATA 1 SATA 1 RAID Type 0 Capacity 120034 MB 120034 MB Stripe Size 64K RAID Array/Type RAID Name ALi_RAID Before create the RAID Array, you can select the Stripe Size first. The Stripe Size is effective for RAID 0. The user can choose a stripe size from 64KByte, 32KByte, 16KByte(default), 8KByte and 4KByte. If the user uses RAID 0 for most A/V editing application or files, 64KByte is recommended. - 65 - Appendix