Gigabyte GA-M52S-S3P Manual - Page 40
NV SATA Sec-Master RAID - network driver
View all Gigabyte GA-M52S-S3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
English NV SATA Pri-Master RAID Enables or disables RAID for the first SATA 3Gb/s connector (SATAII0). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) NV SATA Pri-Slave RAID Enables or disables RAID for the second SATA 3Gb/s connector (SATAII1). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) NV SATA Sec-Master RAID Enables or disables RAID for the third SATA 3Gb/s connector (SATAII2). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) NV SATA Sec-Slave RAID Enables or disables RAID for the fourth SATA 3Gb/s connector (SATAII3). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) On-Chip IDE Channel0 Enables or disables the integrated IDE controller. (Default: Enabled) IDE DMA transfer access Enables or disables DMA (Direct Memory Access) mode for the IDE device(s). Disabled turns off DMA mode for the IDE device(s) and lets it operate in PIO (Programmed Input/Output) mode. (Default: Enabled) NV Serial-ATA 1 Enables or disables the integrated SATA controller. (Default: Enabled) IDE Prefetch Mode Enables or disbales prefetch mode for the integrated IDE controller. Enabled activates the IDE prefetch buffer to enhance hard drive performance. (Default: Enabled) USB Memory Type Specifies the type of memory allocated for USB devices. Options are: SHADOW (default), Base Memory (640K). Onchip SATA Mode (nVIDIA® nForce 520 chipset) Enables or disables RAID for the SATA controllers integrated in the nVIDIA® nForce 520 chipset. IDE Configures the SATA controllers to PATA mode. (Default) AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. RAID Enables RAID for the SATA controllers. Onboard Audio Function Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. Onboard LAN Control Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. GA-M52S-S3P Motherboard - 40 -