Gigabyte GA-M52S-S3P Manual - Page 78
B. Installing Windows Vista
View all Gigabyte GA-M52S-S3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
English B. Installing Windows Vista Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID or AHCI hard drive(s) will not be detected at this stage), select Loading Drivers. (Figure 6). Figure 6 Step 2: Specify the location where the driver is saved, such as your floppy disk (Figure 7). Figure 7 GA-M52S-S3P Motherboard - 78 -
GA-M52S-S3P Motherboard
- 78 -
English
B. Installing Windows Vista
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears (RAID or AHCI hard drive(s) will not be detected at
this stage), select
Loading Drivers
. (Figure 6).
Figure 6
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 7).
Figure 7