Gigabyte GA-M52S-S3P Manual - Page 48

English 2-9 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2007 Award Software MB Intelligent Tweaker(M.I.T.) CPU Frequency PCIE Clock CPU Clock Ratio Robust Graphics Booster Chipset Voltage Control DDR2 Voltage Control CPU Voltage Control Normal CPU Vcore [200] [100Mhz] [Auto] [Auto] [Normal] [Auto] [Normal] 1.3500V Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) CPU Frequency Allows you to manually set the CPU host frequency. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. PCIE Clock Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 Mhz to 150 Mhz. Auto sets the PCIe clock frequency to standard 100 Mhz. (Default: Auto) CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used. Robust Graphics Booster Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo. Chipset Voltage Control Allows you to set the chipset voltage. Normal Supplies the chipset voltage as required. (Default) +0.025V~+0.200V Increases the chipset by 0.025V to 0.200V. GA-M52S-S3P Motherboard - 48 -