Gigabyte GA-M52S-S3P Manual - Page 79
NVIDIA nForce RAID Controller
View all Gigabyte GA-M52S-S3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
English Step 3: When installing the RAID driver, for example, when a screen (Note) as shown in Figure appears, select NVIDIA nForce RAID Controller and press Next. Figure 8 Step 4: After the driver is loaded, the screen will show the RAID or AHCI hard drive(s). Select the location where you want to install the operating system and then press Next to continue the OS installation (Figure 9). Figure 9 (Note) The selectable item(s) displayed in Figure 8 may differ according to the RAID or AHCI driver you will install. - 79 - Appendix
Appendix
- 79 -
English
Step 4:
After the driver is loaded, the screen will show the RAID or AHCI hard drive(s). Select the location
where you want to install the operating system and then press
Next
to continue the OS installation
(Figure 9).
Figure 8
Figure 9
(Note)
The selectable item(s) displayed in Figure 8 may differ according to the RAID or AHCI driver
you will install.
Step 3:
When installing the RAID driver, for example, when a screen
(Note)
as shown in Figure appears, select
NVIDIA nForce RAID Controller
and press
Next
.