Gigabyte GA-P67A-UD7 Manual - Page 11

Storage Interface ŠŠ USB Š Š ŠŠ IEEE 1394 Š Š Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Back Panel ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ 2 x Marvell 88SE9128 chips: - 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices - Support for SATA RAID 0 and RAID 1 - 2 x eSATA 6Gb/s connectors (eSATA/USB Combo) on the back panel supporting up to 2 SATA 6Gb/s devices - Support for SATA RAID 0 and RAID 1 Chipset: - Up to 8 USB 2.0/1.1 ports (4 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers) 2 x Renesas D720200 chips and 2 x VLI VL810 hubs: - Up to 10 USB 3.0/2.0 ports (6 on the back panel, 4 via the USB brackets connected to the internal USB headers) * The USB 2.0 signals of the 6 USB 3.0/2.0 ports on the back panel are from the Chipset. T.I. TSB43AB23 chip: - Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header) 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 4 x SATA 6Gb/s connectors 4 x SATA 3Gb/s connectors 1 x CPU fan header 3 x system fan headers 1 x power fan header 1 x Chipset fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 2 x USB 2.0/1.1 headers 2 x USB 3.0/2.0 headers 1 x IEEE 1394a header 1 x clearing CMOS button 1 x power button 1 x reset button 1 x PS/2 keyboard/mouse port 1 x optical S/PDIF Out connector 1 x coaxial S/PDIF Out connector 2 x IEEE 1394a ports 2 x USB 2.0/1.1 ports 6 x USB 3.0/2.0 ports 2 x eSATA/USB Combo connectors 2 x RJ-45 ports 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone) - 11 - Hardware Installation