Gigabyte GA-P67A-UD7 Manual - Page 96
C. Configuring a RAID array, Create a RAID Array, HBA 0: Marvell 0, Free Physical Disks
UPC - 818313012272
View all Gigabyte GA-P67A-UD7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
C. Configuring a RAID array Create a RAID Array: Move the selection bar to HBA 0: Marvell 0 and press . Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. Topology HBA 0 : Marvell 0 Virtual Disks Free Physical Disks PD 0: WDC WD800JD-22L PD 8: WDC WD800JD-22L Information Vendor ID : Device ID : Revision ID : BIOS Version : Firmware Version : PCIe Speed rate : Configure SATA as : 1B4B 91A3 B1 0.0.0.0000 2.1.0.1502 5.0Gbps IDE Mode Help Marvell RAID on chip controller. ENTER: Operation F10: Exit/Save ESC: Return Figure 2 Under Free Physical Disks, use the key to select the hard drives to be included in the RAID array. The selected hard drive will be marked with an asterisk (*). After selecting the hard drives, press to proceed (Figure 3). Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. Topology HBA 0 : Marvell 0 Virtual Disks Free Physical Disks * PD 0: WDC WD800JD-22L * PD 8: WDC WD800JD-22L Information Port ID : PD ID : Type ID : Status : Size : Feature Support : Current Speed : Model : Serial : FW version : 0 0 SATA PD Unconfigured 114472MB 1.5G 48Bit 1.5G Mode WDC WD800JD-22LS WD-WMAM9W736333 3.18 Help Use space bar to select the free disks to be used in the array. ENTER: Operation SPACE: Select F10: Exit/Save ESC: Return Figure 3 Appendix - 96 -