Gigabyte GA-X38T-DQ6 Manual - Page 56
Rank Write To READ Delay
UPC - 818313004239
View all Gigabyte GA-X38T-DQ6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
English System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Options are dependent on CPU FSB. Auto sets memory multiplier according to memory SPD data. (Default: Auto) Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the CPU Host Frequency (Mhz) and System Memory Multiplier settings. High Speed DRAM DLL Settings Provides two different memory timing configurations. If your system becomes unstable after you overclock the DDR2 memory, select Option 1 or Option 2 to help make your system more stable. Option 1 Memory Timing Configuration 1. (Default) Option 2 Memory Timing Configuration 2. DRAM Timing Selectable (SPD) Manual allows all DRAM timing control items below to be configurable. Options are: Auto (default), Manual. CAS Latency Time Options are: Auto (default), 4~10. DRAM RAS# to CAS# Delay Options are: Auto (default), 1~15. DRAM RAS# Precharge Options are: Auto (default), 1~15. Precharge delay (tRAS) Options are: Auto (default), 1~31. ACT to ACT Delay (tRRD) Options are: Auto (default), 1~15. Rank Write To READ Delay Options are: Auto (default), 1~31. Write To Precharge Delay Options are: Auto (default), 1~31. Refresh to ACT Delay Options are: 0~255 (Default: 0) Read To Precharge Delay Options are: Auto (default), 1~15. tRD Options are: Auto (default), 1~31. tRD Phase Adjustment Options are: Auto (default), 1~31. GA-X38T-DQ6 Motherboard - 56 -