Gigabyte GSmart S1200 User Manual - GSmart S1200_WM6.5 English Version - Page 35
Bluetooth Wireless, Transmissions, 4 Internet Sharing - driver
View all Gigabyte GSmart S1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2. Choose a region and a network. 3. Tap OK to save. 6.3 Bluetooth Wireless Transmissions When you want to form a connection through Bluetooth, please make sure the device you would like to make connections which is also equipped with Bluetooth. Bluetooth Connection Settings When Bluetooth is activated, tap , , or on the upper side of Today screen. You will find on the pop-up window. 3. If you want this device to be detected by other devices with Bluetooth, please check "Make this device visible to other devices". (Without checking this item, other devices with Bluetooth are unable to detect your device.) 4. Tap Devices tab to check the formed connections. 5. On Devices tab, tap "Add new device" to search for other devices with Bluetooth within an effective area. 6. Select a device, and then, tap "Next". The system will ask you to input your password. After you input the password, tap "Next". 7. If the entered password is correct, the connection will be formed. Note: Optional accessories of Bluetooth are available. Please contact with your local dealer for more information. Bluetooth is a short distance wireless communication technology. Before you use Bluetooth, you need to finish settings of connections. 1. Select Start > Settings > Bluetooth > Mode tab. 2. Check "Turn on Bluetooth". COM Ports For example, when you purchase Bluetooth GPS, you can register this device as an effective serial port by following the instructions: Select Start > Settings > Bluetooth > COM Ports tab. Register a New Serial Port: 1. Connect your device and Bluetooth GPS via Bluetooth, first. Then, select "New Incoming Port" to enter Setup Screen. 2. Select a port. 3. Select "Finish". 6.4 Internet Sharing You can use the device as a wireless modem. Internet Sharing allows your PC/Notebook to be connected to a wireless network. If you would like to connect to PC with a USB cable, you will need to install ActiveSync 4.5 or later version in your PC. Please find the drivers in the ActiveSync and S1200│ 6-2