Gigabyte GV-R13128D Manual - Page 9

To install your new graphics card

Get Gigabyte GV-R13128D PDF manuals and user guides View all Gigabyte GV-R13128D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

English To install your new graphics card: 1. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until it is fully seated. * Please make sure that the gold edge connectors of the graphics card is securely inserted. 2. Replace the screws to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. To VGA Monitor To Flat Panel Display To TV/VCR You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Hardware Installation
- 7 -
English
2.
Replace the screws to fasten the card in
place, and replace the computer cover.
You are now ready to proceed with the installation of the graphics card driver. Please
refer to next chapter for detailed instructions.
To TV/VCR
To VGA Monitor
To Flat Panel Display
To install your new graphics card:
1.
Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align your
graphics card with the AGP slot, and press it
in firmly until it is fully seated.
* Please make sure that the gold edge connectors of the graphics card is securely inserted.
3.
Plug the display cable into your card;
then turn on the computer and monitor.