Gigabyte GV-R98P128D Manual - Page 8

English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your Graphics card with the AGP slot, and press it in firmly until the card is fully eated. GV-R98P128D Graphics card 5. Replace the screw to fasten the card in place, and replace the computer cover. AGP Slot After installation, please connect the power cable to your GV-R98P128D graphics card, or system will not boot. 6. Plug the display cable into your card; then turn on the computer and monitor. If your Graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To Flat Panel Display To TV or VCR You are now ready to proceed with the installation of the Graphics card driver. For detailed instructions, select your operating system from the list below. GV-R98P128D Graphics Accelerator - 8 -