Gigabyte X570S AORUS MASTER User Manual - Page 53

NVMe Configuration, Network Stack Configuration, Chipset SATA Port Hot plug

Page 53 highlights

&& Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. ƒƒ NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. ƒƒ SATA Configuration && SATA Mode Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && NVMe RAID mode Allows you to determine whether to use your M.2 NVMe PCIe SSDs to configure RAID. (Default: Disabled) && Chipset SATA Port Enable Enables or disables the integrated SATA controllers. (Default: Enabled) && Chipset SATA Port Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Enabled) && Chipset SATA Port 0/1/2/3/4/5 Displays the information of the connected SATA device(s). ƒƒ Network Stack Configuration && Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && IPv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled. && IPv4 HTTP Support Enables or disables HTTP boot support for IPv4. This item is configurable only when Network Stack is enabled. && IPv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled. && IPv6 HTTP Support Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is enabled. && PXE boot wait time Allows you to configure how long to wait before you can press to abort the PXE boot. This item is configurable only when Network Stack is enabled. (Default: 0) && Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. (Default: 1) ƒƒ Intel(R) Ethernet Controller This sub-menu provides information on LAN configuration and related configuration options. - 53 - BIOS Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

BIOS Setup
- 53 -
&
Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
&
Mass Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage
device is installed.
±
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
±
SATA Configuration
&
SATA Mode
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA
controllers to AHCI mode.
±
RAID
Enables RAID for the SATA controller.
±
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&
NVMe RAID mode
Allows you to determine whether to use your M.2 NVMe PCIe SSDs to configure RAID. (Default: Disabled)
&
Chipset SATA Port Enable
Enables or disables the integrated SATA controllers. (Default: Enabled)
&
Chipset SATA Port Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Enabled)
&
Chipset SATA Port 0/1/2/3/4/5
Displays the information of the connected SATA device(s).
±
Network Stack Configuration
&
Network Stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
the Windows Deployment Services server. (Default: Disabled)
&
IPv4 PXE Support
Enables or disables IPv4 PXE Support. This item is configurable only when
Network Stack
is enabled.
&
IPv4 HTTP Support
Enables or disables HTTP boot support for IPv4. This item is configurable only when
Network Stack
is
enabled.
&
IPv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when
Network Stack
is enabled.
&
IPv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when
Network Stack
is
enabled.
&
PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item
is configurable only when
Network Stack
is enabled. (Default: 0)
&
Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only
when
Network Stack
is enabled. (Default: 1)
±
Intel(R) Ethernet Controller
This sub-menu provides information on LAN configuration and related configuration options.