Gigabyte Z590M GAMING X User Manual - Page 30
Memory Odd Ratio 100/133 or 200/266, Memory Channel Detection Message
![]() |
View all Gigabyte Z590M GAMING X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
&& System Memory Multiplier Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD data. (Default: Auto) && Memory Ref Clock Allows you to manually adjust the memory reference clock. (Default: Auto) && Memory Odd Ratio (100/133 or 200/266) (Note) Enabled allows Qclk to run in odd frequency. (Default: Auto) && Gear Mode (Note) Allows you to improve the maximum OC frequency potential. (Default: Auto) Advanced Memory Settings && Memory Multiplier Tweaker Provides different levels of memory auto-tuning. (Default: Auto) && Channel Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. Auto lets the BIOS automatically configure this setting. (Default: Auto) && Rank Interleaving Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically configure this setting. (Default: Auto) && Memory Boot Mode Provides memory detection and training methods. Auto Lets the BIOS automatically configure this setting. (Default) Normal The BIOS automatically performs memory training. Please note that if the system becomes unstable or unbootable, try to clear the CMOS values and reset the board to default values. (Refer to the introductions of the battery/clear CMOS jumper in Chapter 1 for how to clear the CMOS values.) Enable Fast Boot Skip memory detection and training in some specific criteria for faster memory boot. Disable Fast Boot Detect and train memory at every single boot. && Realtime Memory Timing Allows you to fine-tune memory timings after the BIOS stage. (Default: Auto) && Memory Enhancement Settings Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal (basic performance), Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default: Auto) && Memory Channel Detection Message Allows you to determine whether to show an alert message when the memory is not installed in the optimal memory channel. (Default: Enabled) (Note) This item is present only when you install a CPU and a memory module that support this feature. - 30 -
![](/manual_guide/products/gigabyte-z590m-gaming-x-user-manual-65f27c8/30.png)