Graco 3-in-1 Owners Manual - Page 31
Securing the Child Restraint in Your Vehicle, 1 Using Child Restraint WITH Built-in Harness, 2
View all Graco 3-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
10.0 Securing the Child Restraint in Your Vehicle FAILURE TO PROPERLY SECURE THE CHILD RESTRAINT IN THE VEHICLE INCREASES THE CHILD'S RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Carefully follow these instructions and those in your vehicle owner's manual to be sure your child restraint is properly positioned and held tightly at all times. 10.1 Using Child Restraint WITH Built-in Harness 10.2 With a Vehicle Lap or Lap/shoulder Belt: Lower anchors must be stored when using vehicle belt. See Section 18.1, Storing LATCH, page 57. 1. Place forward-facing on vehicle seat. Slide child restraint back until the restraint is in contact with the vehicle seat back. 2. Thread the seat belt through the belt slot openings: For Lap/Shoulder belt For Lap-only belt 3. Buckle the vehicle belt. The vehicle belt should not be twisted. 31