Graco 3-in-1 Owners Manual - Page 34
With LATCH
View all Graco 3-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
10.3 With LATCH Use vehicle belt (not LATCH connectors) for installations with children weighing more than 48 pounds (21.7 kg). NOTE: Some vehicle manufacturers have lower maximum weight ratings for LATCH anchors, so you must consult your vehicle owner's manual or call the vehicle manufacturer to confirm the limits on your vehicle's LATCH anchors. 1. Unhook LATCH from storage bars on the sides of the seat. For ease of installation, extend LATCH to its maximum length. 2. Place forward-facing on vehicle seat. Slide child restraint back until the restraint is in contact with the vehicle seat back. 3. Hook LATCH Connectors to vehicle lower anchors . Pull firmly on Connectors to be sure they are attached. Belt must lay flat and not be twisted. 4. Tighten LATCH by pushing down hard on child restraint and pulling the adjustment belt . 5. If you need to remove LATCH to readjust, pull up on LATCH plate to loosen strap. 34