Graco 3-in-1 Owners Manual - Page 46
Securing Child & Booster Seat in Vehicle - car seat
View all Graco 3-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
14.0 Securing Child & Booster Seat in Vehicle 1. Place the booster on vehicle seat equipped with a lap/shoulder belt only. Slide restraint back until the restraint is in contact with the vehicle seat back. 2. Place child in car seat with child's back flat against back of car seat. 3. Position lap/shoulder belt through shoulder belt guide not underneath shoulder belt guide . Belt should pass over vehicle belt guide . Fasten buckle and pull up on the shoulder belt to tighten. 4. If belt lays across child's neck, head or face, redirect belt over shoulder by adjusting the head support setting, See page 47, Adjusting Head Support. 5. Check that shoulder belt is properly positioned over shoulder and snug against child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child's flesh or push the child's body into an unnatural position. 46